Planner,Planner Stickers,Silhouette

Creating Planner Stickers with the Silhouette

Screen Shot 2016-01-01 at 10.10.44 AM

Are you looking for a way to make custom planner stickers? Maybe you are wanting to open up your own Etsy shop or maybe you are just wanting to save some money and make your own planner stickers. In this blog post I will teach you how to make your own planner stickers with your Silhouette.

Screen Shot 2015-12-29 at 2.44.07 PM

The first thing you want to do is to set you page settings to 8.5″ x 11″. The reason for this is that most sticker paper that you are going to use will be this size. Since you are using a smaller size, you do not need the Cameo for making planner stickers. You can use the Portrait, which is a smaller size and a bit more affordable.

Screen Shot 2015-12-29 at 3.01.43 PM

Once you have your mat size set up, you need to add registration marks. This is what allows your Silhouette software to work with your printer. **TIP** Make sure you choose the correct style. Most likely you will be using registration marks for type 1 (cameo, portrait). To get the most out of your sticker paper, set the margins or inset numbers to the lowest possible number. In my case I set mine to 0.394

Screen Shot 2015-12-29 at 3.02.41 PM

Now you are ready to start creating your cut file. Designing your stickers or finding clip art is the fun part. You can create your stickers in the Silhouette software or even in Photoshop or Illustrator. Once you have your image you are going to create the cut file. I think the most difficult step is tracing the image. This part is all about trial and error. I turn on the high pass filter, lower pass fitler, and I adjust the threshold and scale. The image doesn’t have to be completely filled. You want to try to get as close to a yellow solid line around the image as possible. **IMPORTANT** Make sure that you do not have any yellow in the background. After you are happy with your trace settings, you are going to select trace outer edge.

Screen Shot 2015-12-29 at 3.03.08 PM

You can stop here if you want and cut the image out right on the edge, but if you want a nice white border around your image you will go to the offset screen. I choose offset, not internal offset. I like my image to have a rounded effect so I choose round and adjust the distance. This number does not have to be a specific number, just play around with it until you find what you like.

Screen Shot 2015-12-29 at 3.03.15 PM

With the offset lines selected, I like to change to line color. The only reason I do this is so I can tell the difference between the offset line and the original trace line. Once the offset line color is changed, I delete my original (red) trace lines.

Screen Shot 2015-12-29 at 3.03.28 PM

This step may not be necessary. but sometimes you will have extra cut lines that you do not want. To get rid of these you are going to select your cut lines, right click, and select release compound path. Now you are able to select the specific part that you want to delete.

Screen Shot 2015-12-29 at 3.03.43 PM

With your cut lines selected, you are going to go to the cut settings menu. Make sure that you choose cut edge.

Screen Shot 2015-12-29 at 3.03.48 PM

For the image itself, you want to select no cut.

Screen Shot 2015-12-29 at 3.04.01 PM

Next, you want to line these two images up. With both images selected go to the align settings and select center. This will align the two images perfectly!!

Screen Shot 2015-12-29 at 3.04.14 PM

When you have the two images aligned, select both, right click, and select group. This will keep you image and cut lines together, even if you move your image around. If you want to create multiple images on one sheet of paper, now is the time. You can easily copy and paste this image as many times as you would like and all the the cut settings will already be set.

Screen Shot 2015-12-29 at 3.04.48 PMYou finally have your cut file created and it is time to print and cut. There are a few sticker papers that I recommend and use myself.


When you are setting up your cut settings it really is all about trial and error. Each Silhouette is different. What works for one person, may not work for another person. The same is true with sticker paper. One setting may work for a certain sticker paper, but not for another. So playing around with your settings is essential. To save on ink, I suggest cutting out basic shapes while finding what work best for you.

Here is a video tutorial for a walk through on this process.

  I hope you found this tutorial helpful. If you have any questions, please feel free to contact me through the comments or my contact section. Until next time, Happy Crafting!!

Related Posts Plugin for WordPress, Blogger...
Previous Story
Next Story

You Might Also Like


  • Reply
    Wendy Martin
    January 17, 2016 at 2:07 am

    still up in the air about which machine to purchase. I have the cricut expressions ( the one with cartridges) and was wondering which cricut machine if any that you can still use them with? a friend has the cameo but the software sounds more confusing than I want to deal with. I do most of my crafts with vinyl (tiles, wood etc) any info would be appreciated, THANKS!

    • Reply
      January 23, 2016 at 6:37 pm

      None of the new Cricut machines are used with cartridges. You are able to pair your cartridges to the cricut design space and have all of your images available digitally without having to repurchase them. I agree, the Silhouette software is a little confusing compared to the Cricut software. Overall I use my CCricut Explore more than my Silhouette Cameo.

  • Reply
    Cathy Dowd
    April 8, 2016 at 2:39 pm

    How did you print your calibration page for the cricut?

  • Leave a Reply